Hobby-Lobby
125MAH 1S 3.7V 25C LIPO BATTERY FOR MICRO MODELS
| Technical Specifications | 125mAh 1S 3.7V G6 Pro Lite 25C LiPo, Ultra Micro Specs |
| Capacity | 125mAh |
| Voltage | 3.7V |
| Connector Type | Ultra-Micro |
| Weight | 0.12 oz (3.4g) |
| Length | 1.34 in (34mm) |
| Width | 0.43 in (11mm) |
| Height | 0.22 in (5.5mm) |
| Maximum Continuous Discharge | 25C |
| Maximum Burst Discharge | 50C |
| Maximum Continuous Current | 3.1A |
Configuration: 1S, ,
Jason Says: "Simply the best. If performance and service matters, ...Hobby-Lobby
125MAH 1S 3.7V 25C LIPO BATTERY FOR MICRO MODELS
,
125mAH 1S 3.7V 25C Lipo Battery for Micro Models There's ...Hobby-Lobby
125MAH 1S 3.7V 25C LIPO BATTERY FOR MICRO MODELS
,
125mAH 1S 3.7V 25C Lipo Battery for Micro Models There's ...Hobby-Lobby
MODEL RETRACT MECHANISM, PAIR
,
Model Retract Mechanism, pair Includes the mechanical parts, 3mm carbon ...Hobby-Lobby
MODEL KNUCKLE AXLE ASSEMBLY
,
Model Knuckle Axle Assembly Parts for spring loaded axle assembly. ...Hobby-Lobby
PROFESSIONAL VARIABLE PITCH PROPELLER FOR AXI 2204/54
,
Variable Pitch Prop for tiny AXI Designed to work with ...Hobby-Lobby
6" PROP/SPINNER FOR LONG CAN 400 MOTORS
,
6" Prop/Spinner for Long Can 400 Motors For use on ...Hobby-Lobby
ESTES MODEL ROCKET RECOVERY WADDING
,
Contains enough wadding for up to 25 flights! Flame resistant ...Hobby-Lobby
ESTES MODEL ROCKET IGNITERS (6 PACK)
| Voltage Required | 6-12 Volts |
Technical Specifications:,
6 Estes Model Rocket Igniters 6 Estes Model Rocket Igniters ...Hobby-Lobby
ESTES B6-6 B6-0 MODEL ROCKET ENGINE (3 PACK)
| Technical Specifications | Length |
| Diameter | 3/4" |
Features:, Lightweight non-metallic casings made w/specially formulated paper., Includes:, 3 B6-0 Booster Stage Rocket Engines,
Booster Stage Rocket Engine Estes B6-0 Estes Model Rocket Engine. ...Hobby-Lobby
SPEKTRUM DX3S 3-CH. DSM 2.4 GHZ SURFACE RADIO
Most advanced sport-level DSM radio ever developed Combining Spektrum’s industry-leading 2.4GHz DSM technology with valuable telemetry features, the DX3S represents the most advanced sport-level DSM radio ever developed. RTR drivers and sport racers can add the safety of telemetry and monitor vital vehicle stats right from their transmitter, without any additional equipment. Keep your engine operating in the optimum temperature range, keep an eye on your battery voltage and check out just how fast your vehicle is running, all right from the large LCD readout of the DX3S. Includes an SR3300T 3-channel receiver. Spektrum DX3S 3 Ch. 2.4 GHz Surface Radio Features: Now compatible with the MR3000 3-channel marine receiver and DSM2 surface receivers, in addition to DSM surface receivers Integrated telemetry with graphically depicted gauges on transmitter* 10-model memory Includes free bonus SR300 3-channel DSM sport receiver Monitor your engine or motor’s operating temperature in either Fahrenheit or Celsius Never let a low battery stop you in your tracks - the DX3S and integrated telemetry let you watch over your receiver pack’s voltage to keep you in the running Keep tabs on your engine’s operating range-safe high-rev operation Rolling selector user interface for fast, easy programming and setup Digital trims Steering dual rate Travel adjust Sub trims Exponential 3-timer functions Aux/Steering channel mixing Telemetry alerts * The typical telemetry range is 100 - 200 feet and will vary depending on the operating environment. Specs: # of Channels: 3 Modulation: DSM Band: 2.4 GHz Servos: None Receiver: SR3300T and SR300 Model Memory: 10 Transmitter (Tx) Battery Type: 4 AA Alkaline (included), ,
Most advanced sport-level DSM radio ever developed Combining Spektrum’s industry-leading ...Hobby-Lobby
STILETTO 29 BRUSHLESS TUNNEL BND (OVERSIZE)
| Length | 30.125 in (765mm) |
| Beam | 11 in (279mm) |
| Prop Size | 1.6 x 2.5 inch |
| Hull Type | Tunnel |
| Kit/RTR | BND |
| Minimum Age Recommendation | 14 years |
Stiletto 29 Brushless Tunnel BND Highlights:, Bind-N-Drive™ model does not include a transmitter, allowing you the freedom to use the Spektrum™ 2.4GHz DSM® transmitter of your choice, Needed to Complete: Two 7.2V sub-C batteries or Two 7.4V 25C Li-Po batteries, Spektrum DSM2 Marine compatible transmitter, Technical Specifications:, Stiletto 29 Brushless Tunnel BND Specs:, Motor Size:, 1800Kv brushless water-cooled, Radio:, S100 Servo, Spektrum 2.4GHz Marine Receiver, (Tranmitter required), Speed Control:, 60-amp brushless water-cooled, Hull Material:, Fiberglass Composite, Needed to Complete: Two 7.2V sub-C batteries or Two 7.4V 25C Li-Po batteries, Spektrum DSM2 Marine compatible transmitter,
Stiletto 29 Brushless Tunnel BND Designed by Pro Boat team ...Hobby-Lobby
IMPULSE 31 DEEP-V BL RTR
| Beam | 9 in (229mm) |
| Motor Size | 1800Kv brushless water-cooled |
| Radio | Pro Boat 2.4GHz pistol grip transmitter/Spektrum MR200 receiver |
| Speed Control | 60-amp brushless water-cooled |
| Hull Material | Fiberglass composite |
| Prop Size | 1.6 in x 2.5 in |
| Hull Type | Fiberglass Deep-V |
| Battery | 2-7.2V Ni-MH sub-C or 7.4 Li-Po 20C+ (not included) |
| Kit/RTR | RTR |
| Drive System | Flex shaft/direct |
| Minimum Age Recommendation | 14 years |
Needed to Complete: 4 - AA Batteries for Transmitter, 2-7.4V 20C+ LiPo batteries or 2-7.2V sub-C batteries w/Deans connectors (NiMH BL ESC Programming Module) - Model comes pre-programmed LiPo ready Technical Specifications: Impulse 31 Deep-V BL RTR Specs:Length: 31 in (787mm), ,
Impulse 31 Deep-V BL RTR Race ready out of the ...Hobby-Lobby
400 CLASS J-3 CUB EPO FOAM RTF
Incredible scale detail in a great flying EPO super scale J3 Cub 40-1/4 in. wingspan, 27-1/8 in. long, 232-1/2 sq. in. wing area, 23 oz. flying weight. There is not a more iconic civil airplane than the Piper J-3 Cub, thousands of pilots have earned their wings at its controls and logged untold hours of flight in this legend. There are a lot of model airplanes that call themselves Cubs but few have the degree of detail that makes this model a standout. Sitting on the flightline it just looks right, the detailed 4-cylinder engine poking out of the cowl, the fat tires and bungee suspension (yes it works), wing struts and jury struts and even the sprung tail wheel all add to the illusion. In the air the realism continues, the classic paint scheme and true to scale proportions just say Cub. The model is nearly ready to fly when you take it from the box, just a little assembly and battery charging and you are ready to go. Airplane is complete with 2.4GHz 4-channel Transmitter and Receiver for glitch free flying. The motor is a brushless outrunner connected to a 20A ESC and all powered by the included 3-cell 1300mAh LiPo battery. A plug-in wall LiPo balance charger is included and 4 servos are pre-installed. The flight time is about 10 minutes on a charge. The EPO foam used in the wings and fuselage really adds to the durability of the airplane and resists that hanger rash and dings that an everyday flyer sustains. Controls are ailerons, elevator, rudder, and throttle. A 400 Class J3 ARF version is also available. 400 Class J3 Cub RTF Highlights: Highly detailed scale appearance with full cockpit detailing. Includes instrument panel, pilot and joystick. Cockpit is a single injection molded part that retains the elegance of the original aircraft. The main landing gear replicates the original and provides scale dampening action. The steerable tail wheel is scale in appearance and is spring dampened. The engine detail is unmatched in authenticity Fuselage and Wings are EPO foam construction for great durabil,
Incredible scale detail in a great flying EPO super scale ...